Hi everyone, I’m looking for help with a WireGuard routing issue on my GL.iNet router.

https://docs.gl-inet.com/router/en/4/tutorials/wireguard_server_access_to_client_lan_side/#how-to-access-wireguard-client-lan-side-from-server

  • I set the Target Address to 192.168.8.0/24.
  • I set the Gateway to 10.1.0.1.
  • After applying this, devices can still connect to the GL.iNet Wi-Fi, but there is no internet access.
  • The router’s admin panel at http://192.168.8.1/ is no longer accessible.

Has anyone experienced this before, or can explain what went wrong and how to recover access without a full reset?

Thanks in advance for any help.

  • JoeKrogan@lemmy.worldEnglish
    3·
    1 day ago

    Try connect with ethernet to access the admin page ?

    If that doesnt work another option is to hard reset the router

    • tatoko556@reddthat.comOPEnglish
      2·
      1 day ago

      Thank you, a short reset worked!

      But how do I set up the routing correctly on the WireGuard router? What should the Target Address and Gateway be if my LAN is under 192.168.8.0/24, and my mobile client with the WireGuard client has a client IP of 10.0.0.2/24?