Hi everyone, I’m looking for help with a WireGuard routing issue on my GL.iNet router.

https://docs.gl-inet.com/router/en/4/tutorials/wireguard_server_access_to_client_lan_side/#how-to-access-wireguard-client-lan-side-from-server

  • I set the Target Address to 192.168.8.0/24.
  • I set the Gateway to 10.1.0.1.
  • After applying this, devices can still connect to the GL.iNet Wi-Fi, but there is no internet access.
  • The router’s admin panel at http://192.168.8.1/ is no longer accessible.

Has anyone experienced this before, or can explain what went wrong and how to recover access without a full reset?

Thanks in advance for any help.

  • tychosmoose@lemmy.worldEnglish
    1·
    2 days ago

    So you have a single mobile device connecting via wg, correct? Not a second network?

    If so the only configuration you should need on the router are firewall rules to allow forwarding from wg to lan. I am guessing that’s what the second step in the GL-iNet help accomplishes. That’s what I would recommend trying.

    If I was doing this on “normal” OpenWRT I would create a firewall zone wg, and allow traffic to/from it and lan.

    On the client device you should be good to go without changes if AllowedIPs is set to 0.0.0.0/, ::/0 (sending all traffic through wg).