Hi friends.

I’ve been trying to find docker-compose.yaml for pihole+unbound so I can use pihole as both a recursive dns server and as local dns alongside Nginx Proxy Manager. But since v6 of pihole all the old files I could find don’t work properly or at all.

Does anyone here use pihole+unbound in docker?

  • Christopher@lemmy.grey.failEnglish
    24·
    4 days ago
    services:

  pihole:
    container_name: pihole
    image: pihole/pihole:latest
    hostname: sheldon
    environment:
      HOST_CONTAINERNAME: pihole
      TZ: ${TZ}
      WEBPASSWORD: ${WEBPASSWORD}
      DNSMASQ_LISTENING: "all"
      PIHOLE_DNS_1: "unbound#53"
    ports:
      - "53:53/tcp"
      - "53:53/udp"
      - "67:67/udp" # Only required if you are using Pi-hole as your DHCP server
      - "8080:80/tcp"
    # network_mode: host
    dns:
      - 127.0.0.1
    networks:
      dns:
        ipv4_address: 172.22.0.2
    volumes:
      - /mnt/appdata/pihole/etc-pihole:/etc/pihole
      - /mnt/appdata/pihole/etc-dnsmasq.d:/etc/dnsmasq.d
    restart: unless-stopped
    depends_on:
      unbound:
        condition: service_healthy

  unbound:
    container_name: unbound
    image: klutchell/unbound:latest
    networks:
      dns:
        ipv4_address: 172.22.0.3
    volumes:
      - /mnt/appdata/unbound:/opt/unbound/etc/unbound/custom
    restart: unless-stopped
    healthcheck:
      test: ["CMD", "dig", "google.com", "@127.0.0.1"]
      interval: 10s
      timeout: 5s
      retries: 5

  wg-easy:
    container_name: wg-easy
    image: ghcr.io/wg-easy/wg-easy:15
    ports:
      - "51820:51820/udp"
      - "51821:51821/tcp"
    # environment:
    #   TZ: ${TZ}
    #   LANG: en
    #   WG_HOST: ${WG_HOST}
    #   PASSWORD_HASH: ${PASSWORD_HASH}
    #   WG_DEFAULT_DNS: 172.22.0.2
    #   WG_MTU: 1420
    networks:
      dns:
        ipv4_address: 172.22.0.4
    volumes:
      - /mnt/appdata/wg-easy:/etc/wireguard
      - /lib/modules:/lib/modules:ro
    cap_add:
      - NET_ADMIN
      - SYS_MODULE
    sysctls:
      - net.ipv4.ip_forward=1
      - net.ipv4.conf.all.src_valid_mark=1
      - net.ipv6.conf.all.disable_ipv6=0
      - net.ipv6.conf.all.forwarding=1
      - net.ipv6.conf.default.forwarding=1
    restart: unless-stopped

networks:
  dns:
    external: true

    Feel free to just delete the wg-easy service.

    • irmadlad@lemmy.worldEnglish
      3·
      3 days ago

      How well does that run in docker? I’ve always liked docker, but it seems to me that certain apps should touch metal than be containerized. Maybe I’m too old school.

      • Christopher@lemmy.grey.failEnglish
        4·
        3 days ago

        It runs quite well; Docker’s not a full fledged virtual machine so much as a virtualization layer. I also love the portability of running this in Docker. I rsync a backup of this and the Appdata folder every night. When or if this server fails, I can be up and running again in minutes on another machine.

        • Zanathos@lemmy.worldEnglish
          2·
          2 days ago

          I do exactly the same thing for all three of these services! My implementation is on podman rather than docker, but basically the same deal.

      • B0rax@feddit.orgEnglish
        4·
        3 days ago

        I have all these services in docker as well (although not with the docker compose file here) and they run perfectly fine with a very low resource footprint.

        • irmadlad@lemmy.worldEnglish
          1·
          3 days ago

          0K that’s cool. I love docker. I would like to upgrade to k8s but I haven’t yet plumbed the depths of docker. I was just with the overhead of docker, since Pi-Hole/Unbound is a dedicated system, I thought maybe it’d get better thru put baked in. I wouldn’t listen to me tho, I’m medicated.

          • B0rax@feddit.orgEnglish
            1·
            3 days ago

            As an anecdote: I have one system (x86) with pi-hole and unbound in a docker, and a secondary raspberry pi with pi-hole running on bare metal. The docker system (although much more performant in general) has a lower latency as the raspberry bare metal install.

    • Outwit1294@lemmy.todayEnglish
      4·
      3 days ago

      You seem knowledgeable. I have a question about this. I have ran this type of setup before. Every time, I ended up ditching unbound because it throws DNSSEC error. I have tried troubleshooting but it doesn’t work.

      • Zanathos@lemmy.worldEnglish
        2·
        2 days ago

        I just went through my setup to verify dnssec settings in unbound to troubleshoot strange latency when removing random names while browsing. Did you verify the unbound certificate file was created and had the proper permissions? There are also a couple other configuration items in unbound related to dnssec that can be tweaked to improve the implementation.

        • Outwit1294@lemmy.todayEnglish
          1·
          2 days ago

          I tried again today with baremetal and docker install but I always end up with SERVFAIL after some time.

          • Zanathos@lemmy.worldEnglish
            3·
            2 days ago

            Instead of port 53, I need to run unbound on 5335 (or another obscure port).I believe I also had to make some host level changed for DNS to operate correctly for incoming requests.

            Here’s my podman run commands. These might have changed a bit with Pihole v6, but should still be ok AFAIK.

            #PiHole1 Deployment/Upgrade Script podman run -d --name pihole -p 53:53/tcp -p 53:53/udp -p 8080:80/tcp --hostname pihole --cap-add=CAP_AUDIT_WRITE -e FTLCONF_REPLY_ADDR4=192.168.0.201 -e PIHOLE_DNS_=“192.168.0.201#5335;192.168.0.202#5335” -e TZ=“America/New York” -e WEBPASSWORD=" MyPassword" -v /var/pihole/pihole1:/etc/pihole -v /var/pihole/pihole1/piholedns/:/etc/dnsmasq.d --restart=unless-stopped --label=“io.containers.autoupdate=registry” docker.io/pihole/pihole:latest

            #UnBound1 Deployment/Upgrade Script podman run -d --name unbound -v /var/pihole/pihole1/unbound:/opt/unbound/etc/unbound/ -v /var/pihole/pihole1/unbound/unbound.log:/var/log/unbound/unbound.log -v /var/pihole/pihole1/unbound/root.hints:/opt/unbound/etc/unbound/root.hints -v /var/pihole/pihole1/unbound/a-records.conf:/opt/unbound/etc/unbound/a-records.conf -p 5335:5335/tcp -p 5335:5335/udp --restart=unless-stopped --label=“io.containers.autoupdate=registry” docker.io/mvance/unbound:latest

            • Outwit1294@lemmy.todayEnglish
              1·
              16 hours ago

              I used a similar docker compose config. Yesterday I learned that unbound doesn’t have root.hints by default. I downloaded it following Anudeep’s guide on Github and it was working. But within 2 hours, it started taking too long to respond and eventually stopped replying to pihole. I had to switch to cloudflare.

              • Zanathos@lemmy.worldEnglish
                1·
                11 hours ago

                Have you modified the default unbound config at all? This sounds like increasing the cache size limits and timeframes in the unbound config could help.

                I’m actually chasing an issue I’ve always had where everything works great in my environment, but on mobile certain domains take ages to finally load up for me. I think it’s a combination of my Pihole blocking and the amount of domains tied to a page (advertisements and tracking), but would love to figure it out. I work around it right now by flipping wifi off and on again in those instances.

                • Outwit1294@lemmy.todayEnglish
                  1·
                  5 hours ago

                  I have used pi-hole recommended config. I have used unbound recommended config (which feels incomplete and confusing). I have tried tweaks here and there. End result is this.

                  So far, the longest I have had success is with unbound docker container. The issue with that is that it seems to not be caching entries.

  • slackarr@piefed.caEnglish
    3·
    3 days ago

    I used to use a pihole+unbound single container docker image but technitium is just easier for me. Might be worth exploring other options like adguard home also.